Minis Power Supply Instruction Manual Catalog Nos. Minis 150VS Minis 150VP Minis 300VS Minis 300VP www.majorsci.com service@majorsci.
Un Packing list Minis 150VS or Minis 150VP or Minis 300VS or Minis 300VP: - 1 x Smart Minis 150V or 1 x Pink Minis 150V or 1 x Smart Minis 300V or 1 x Pink Minis 300V - 1 x US Plug Power Cord or 1 x Euro Plug Power Cord or 1 x UK Plug Power Cord or 1 x Israel Plug Power Cord - 1 x Minis Power Supply Instruction Manual Major Science is liable for all missing or damaged parts / accessories within 7 days after customer received this instrument package.
Packing list Minis 150VS or Minis 150VP or Minis 300VS or Minis 300VP: - 1 x Smart Minis 150V or 1 x Pink Minis 150V or 1 x Smart Minis 300V or 1 x Pink Minis 300V - 1 x US Plug Power Cord or 1 x Euro Plug Power Cord or 1 x UK Plug Power Cord or 1 x Israel Plug Power Cord - 1 x Minis Power Supply Instruction Manual Signed: Date: 2
Table of Contents Un packing list Packing list Warning Safety Information Product Specifications Product Description Introduction Overview Controls and Features 1 2 4 5 7 8 9 9 10 Installation Instructions Operation Instructions Troubleshooting Guide Maintenance Ordering information Warranty 11 12 13 14 15 18 3
Warning The Minis power supply series has been tested and found to comply with the limits for the CE regulation. Also, Minis power supply series is RoHS compliant to deliver confident product, which meets the environmental directive. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
10. The unit shall be operated Only by qualified personnel. Safety Information Use the high level of precautions against any electrical device. Before connecting with the electrical supply, check the supply voltage is within the range stated at the rating label, and this device must be earthed. Place the unit in a safe and dry location and MUST NOT touch things in the surrounding. Also do follow the safety precautions for chemicals and dangerous materials.
Avoiding Damage to the Instrument 1. Do not attempt to operate the device if it is damaged. 2. Protect this unit from physical damage, corrosive agents and extreme temperatures (direct sunlight etc). 3. For proper ventilation and safety concerns, keep at least 10 cm of space behind the instrument, and at least 5 cm of space on each side. 4. Do not operate the power supply series in high humidity environments (> 95%), or where condensation may occur. 5.
Product Specifications Max. Watt Output Type Max. Voltage Max.
Product Description Major Science Smart Minis 150V power supply (Cat. No. Minis 150VS) and Pink Minis 150VP power supply (Cat. No. Minis 150VP) are microprocessorcontrolled mini power supplies designed to meet most electrophoresis needs in a personal, single, easy to use unit. The Minis 150V power supply is capable of running DNA/RNA electrophoresis, whilst Smart Minis 300V power supply (Cat. No. Minis 300VS), and Pink Minis 300V (Cat. No.
Introduction Overview Major Science Minis 150V and 300V Power Supplies are recognized as very unique power supply equipped with very powerful specifications to cover the majority of electrophoresis applications on the market. Sufficient and accurate output voltages, two pairs of terminator and compact size, RoHS and CE compliance for environmental and safety concerns can deliver accurate and reliable experimental results from one experiment to another.
Controls and Features Please refer to Figures on the following page for the location of the following controls and features. Smart Minis 150V Pink Minis 150V Cat. No.: Minis 150VS Cat. No.: Minis 150VP Smart Minis 300V Pink Minis 300V Cat. No.: Minis 300VS Cat. No.: Minis 300VP Front Control Panel 1. Key -- to increase either Voltage or Time value 2. Key - to decrease either Voltage or Time value 3.
4. Key – to select Voltage value 5. Key – to set or select Timer mode 6. START/STOP –This LED light indicates the unit is ON or OFF 7. Volt Temp – This LED light indicates Voltage is on set value. 8. TIMER – This LED light indicates on Timer Mode Installation Instructions Minis Power Supply is actually an already installed instrument. As long as it is placed on a sturdy and level surface in a safe, dry place, and further connects with well-prepared electrophoresis system, it is ready for operation.
Operation Instructions 1. Place Minis Power Supply series on a sturdy and level surface in a safe, dry place, away from laboratory traffic. 2. Ensure that the AC power switch is OFF, and then plug the three-pronged power cord into a grounded three-prong AC outlet of the appropriate voltage (110V to 240V as indicated on the rating sticker near the AC cord on the back of the unit). 3. Turn the AC power ON by the switch on the rear. 4.
Troubleshooting Guide Many operating problems may be solved by carefully reading and follow the instructions in this manual accordingly. Some suggestions for troubleshooting are given below. Should these suggestions not resolve the problem, contact our SERVICE DEPARTMENT or a distributor in your region for assistance. If troubleshooting service is required, please include a full description of the problem.
Replacing the Fuse For additional fuses, contact Major Science co. ltd. To replace the fuse: 1. Turn off the main power switch at the rear of Minis 150V / Minis 300V Power Supply and detach the power cord from the rear of Minis 150V / Minis 300V Power Supply. 2. Open the fuse compartment located inside the Power Entry Module by inserting a small flat blade screwdriver into the slot below the ON/OFF switch. Turn the screwdriver to gently pry open the fuse compartment.
Ordering Information Minis 150V Power Supply Cat. No.
One Electrophoresis Packages Dual Electrophoresis Packages 16
Minis 300V Power Supply Cat. No.
Warranty Major Science warrants apparatus of its manufacture against defects in materials and workmanship, under normal service, for two years from the shipping date to purchaser. This warranty excludes damages resulting from shipping, misuse, carelessness, or neglect. Major Science’s liability under the warranty is limited to the receipt of reasonable proof by the customer that the defect is embraced within the terms of the warranty.
MEMO 19
