Instruction manual

10
Section 3 Installation Instructions
Mini Pro 300V Power Supply is actually a pre-installed instrument. As long as it
is placed on a sturdy and level surface in a safe, dry place, and further
connects with well-prepared electrophoresis system, it is ready for operation.
Section 4 Operation Instructions
4.1 Control interface
You will be able to find six buttons and 4 LED indicators from the faceplate.
The LED indicates the status of the unit.
a. Setup Mode (before pressing RUN/Start)
LED light indicates your current parameter. If you are setting a value for
Voltage, the Voltage LED will be lit.
b. Operation Mode
After you start the experiment, the LED light next to the RUN/STOP button
will light up to indicate unit under operation.