User guide

10 Charging the batteries
There are two ways to charge the battery of the PMR's :
10.1 Using the desktop charger
The desktop charger provides drop-in charging
convenience.
1. Put the desktop charger on a flat surface.
2. Plug one end of the supplied adapter into
an easy accessible electric socket and
the other end into the connector on the
backside of the desktop charger 28
(See Page 1 - illustration 3)
3. Put the radio in the charger as indicated.
4. The charging LED 29 will turn on if it’s properly
inserted and charging.
(See Page 1 - illustration 3)
10.2 Connecting the power adapter directly
to the PMR
1. Connect the connector of the power adapter
directly to the charger connection 3 of the
PMR.
It will take about 8 to 10 hours to fully charge the batteries.
MTD90
LICENCE FREE 2-WAY RADIOS
Page 6
Do not press the -Button of the PMR’s while they are charging !PTT 12
Do not short-circuit the batteries or dispose in fire. Remove the
batteries if this device is not going to be used for a long period.
Do not charge non rechargeable batteries like Alkaline batteries in the
charger. This might damage the PMR’s and charger unit.