Box Contents (https://www.majority.co.uk/wp-content/uploads/2021/11/Sierra-Plus-Whats-In-The-Box-1.jpg) Controls and Functions Front and Top View 1. Display panel 2. On/Off button 3. Volume up 4. Volume down 5.
(https://www.majority.co.uk/wp-content/uploads/2021/06/Sierra-Front-and-Top.png) Back View 6. AC in – Connect to power supply 7. HDMI in 2 8. HDMI in 1 9. HDMI Out (ARC) 10. AUX in 11. Optical in 12. USB in (https://www.majority.co.uk/wp-content/uploads/2021/06/Sierra-Back-View.
Subwoofer Back View 1. LED indicator – Indicates pairing between the soundbar and the subwoofer (make sure that both soundbar and subwoofer are connected to the power supply simultaneously, and then switch on the soundbar and subwoofer). 2. PAIR button – Automatically pairs the soundbar with the subwoofer. Press and hold to reset the connection between the sound bar and the subwoofer. 3. USB port – For software upgrade only. 4. AC in – Connect to the power supply. (https://www.majority.co.
7. Treble-Up �. Treble-Down 9. Mute 10. Input (ARC, HDMI 1, HDMI 2, Bluetooth, AUX, USB & OPTICAL) 11. Next/Skip 12. Movie 13. News 14. Bass-Up 15. Bass-Down 1�. 3D (https://www.majority.co.uk/wp-content/uploads/2021/06/Sierra-Remote.
Please note all (Ref.) refer to the Controls and Functions in the above diagrams. Mode Indicator Input Type Display Indicator RCA The front display will show AUX. AUX The front display will show AUX. HDMI IN The front display will show HDMI 1 or HDMI2. HDMI OUT The front display will show HDMI ARC. OPTICAL The front display will show OPTICAL. USB The front display will show USB. Bluetooth Ready The front display will �ash BLUETOOTH.
Ensure that the power supply voltage is within the range of 110V -240V ~ 50Hz/60Hz. Any other voltage may cause damage to the unit. The Sierra Plus comes with a power adapter for the soundbar. Make sure to unwind the cable to its full length. Connect the plug to a mains socket by fully inserting the plug into the mains socket. Connect the adapter to the AC power port in the back of the soundbar (Back View Ref.6).
You will need a TV/audio source with RCA audio output sockets and an RCA to 3.5mm AUX cable (included). Connect the RCA stereo audio cable to your TV’s stereo RCA (L/R) audio output sockets (for help on how to locate your TV’s audio output sockets, refer to your TV’s user manual). Connect the 3.5mm AUX end of the cable to the side of the soundbar via the AUX IN port (Back View Ref.10). Press ‘INPUT’ on the remote control (Remote Control Ref.10) or the unit (Front and Top View Ref.
You will need a TV/audio source with an HDMI High De�nition Multimedia Interface HDMI cable (not included). Connect the HDMI cable from the HDMI output on the soundbar (Back View Ref.9) to the HDMI input on your TV( for help on how to locate your TV’S HDMI ARC input, refer to your TV’s user manual). Press the ‘INPUT’ button on the remote control (Remote Control Ref.10) or the ‘SOURCE/MODE’ button on the top of the soundbar (Front and Top View Ref.5) until ‘ARC’ mode is selected.
Press the ‘INPUT’ button on the remote control (Remote Control Ref.10) or the ‘SOURCE/MODE’ button on the top of the soundbar (Front and Top View Ref.5) to switch to ‘OPTICAL’ mode. The display will show ‘OPTICAL’ (Front and Top View Ref.1). How do I set the correct audio settings for Optical Mode? When using the soundbar in Optical mode, or when using the soundbar with a streaming app, you may experience sound issues if you have your audio settings set up incorrectly.
To unpair, hold down the ‘PAIR’ button on the remote control for 3 seconds (Remote Control Ref.2). You can now pair the soundbar with another Bluetooth device. If your device should become unpaired or you �nd it is unable to connect, repeat the steps above. Volume Control To adjust the volume of the soundbar, press either the ‘Volume Up’ or Volume Down’ buttons on the remote control (Remote Control Ref.3/Ref.5) .
• The TV may not be able to pass through the Atmos stream to the soundbar even though it is capable of processing Atmos itself. A workaround for this is to suggest a direct connection from the player to the soundbar. For example, if your TV or DVD player has 2 x HDMI outputs. 1 is labelled “Audio/Video”. You can connect this to the TV for the picture. The second connection is labelled “Audio only”. This can be connected directly to the Sierra Plus.
Subwoofer 30.6 x 19 x 37 cm Power 12V ~ 1A Weight 7.9 kg Speakers Stereo Sound Version Dolby Atmos AUX In 3.5 mm RCA Input 3.5 mm Safety Info IMPORTANT Please read all instructions carefully before use. WARNING Risk of electric shock. Do not open. 1. Read these instructions: 2. Heed all warnings. 3. Follow all instructions in the user manual. 4. Do no clean the apparatus near or with water. 5. Do not block any ventilation openings.
10. Refer all servicing to quali�ed service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped. 11. No naked �ame sources, such as lit candles, should be placed on the apparatus. 12.
