User Manual
You will need a TV/audio source with an HDMI High Denition Multimedia Interface HDMI cable
(not included).
Connect the HDMI cable from the HDMI output on the soundbar (Back View Ref.9) to the HDMI input on your
TV( for help on how to locate your TV’S HDMI ARC input, refer to your TV’s user manual).
Press the ‘INPUT’ button on the remote control (Remote Control Ref.10) or the ‘SOURCE/MODE’ button on the
top of the soundbar (Front and Top View Ref.5) until ‘ARC’ mode is selected. The display will show ‘ARC’
(Front and Top View Ref.1).
Using the native controls on your connected device, ensure the audio settings are set to ARC or HDMI Audio.
Using the AUX/Line In Port
You will need an AUX source with an AUX audio output and an AUX audio cable (not included).
Plug one end of a 3.5mm audio input cable into the LINE port on the side of the soundbar (Back View Ref.10).
Plug the remaining end of the cable into the audio output/headphone output on your MP3 player or audio
device.
Press the ‘INPUT’ button on the remote control (Remote Control Ref.10) or the ‘SOURCE/MODE’ button on the
top of the soundbar (Front and Top View Ref.5) to switch to ‘AUX’ mode. The display will show ‘AUX’ (Front
and Top View Ref.1).
Using the Optical Input
You will need an audio source with an optical audio output and a digital optical audio cable (not
included).
Connect the optical cable to the optical output on the audio source and the OPTICAL port in the back of the
soundbar (Back View Ref.11).