Owner`s manual

MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-429-2G
9
STEP 7
Install Pellet Hopper and
Warmer/Smoker box lid handles
using 2 each (4 total) #6 x 3/8”
screws and lock washers.
(Note: Handles should be installed
only on the front side of the lid. The
2 screw holes on the back of the
lids are not used). Peel off plastic
film before installing handle.
Step 7
STEP 8
grill lid handleInstall the using 2
each 1/4” x 1/2” long screws, 1/4”
lock washer, and 1/4” x 5/8” flat
washer. Make sure flat washer is
against the inside surface of the
lid. Peel off plastic film before
installing handle.
Step 8
STEP 6
Place the Warmer/Smoker box
grease tray and grate into the
bottom of the Warmer/Smoker box.
Step 6