Owner`s manual

MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-429-2G

PELLET BOSS

PERATING INSTRUCTIONS

PELLET BOSS

PERATING INSTRUCTIONS

ON / OFF SWITCH

FUSE HOLDER

SELECT BUTTON

SET BUTTON

ARROW BUTTONS

TEMPERATURE PROBE JACKS

Main power switch which turns the grill ON and

OFF. When first turned on the grill will go into a

start-up cycle on "SMOKE" and light the pellets

in the fire pot.

The FUSE protects the circuit board from

component failure. Replace blown fuses with

the same style 2.0 amp fuse.

The select button is used to activate different

screens. Each time you push the SELECT

button the screen will change to the next function screen. Press and hold

the SELECT button to keep the desired screen constantly displayed. (A

lock icon will appear on the display screen). To allow the screens to begin

scrolling again, press any button.

Press the SET button to change or accept changes to any screen.

Example: To change the grill set temperature press SET (the screen will

flash) arrow up or down to desired temperature then press SET again to

accept the change.

Use the ARROW buttons to scroll though screens or adjust settings up or

down. Note: Most settings wrap so you can adjust either direction.

Use the Temperature Probe to monitor the internal

temperature of the food you’re cooking. Plug the

probe into the jack, run the probe through the

mouse hole on the front left side of the grill opening

and insert the probe end into your food. The display

will show the temperature of the food under each

probe number 1,2 & 3.