Owner`s manual

Note: If you have purchased one of MAK GRILLS heavy-duty M1
Armored Probes, you will need to reconfigure the meat probe type in the
Pellet Boss software. To do this:
Push SELECT for 10 seconds until MAKGRILL Ver. 1.7 (or higher) is
displayed.
Push an arrow key until you reach MEAT TYPE
Press SET-the default meat probe type will begin to flash
Use arrow key to select between STANDARD and M1 ARMOR
Press SET to accept meat probe choice
Press and hold SELECT to return to normal display screens
NOTE: Once one type of meat probe is selected, you will not be able to
use a different type of meat probe without going back into the
maintenance area and selecting the other type of meat probe.
?
?
?
?
?
?
MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-429-2G
15
Screen Display - TIMER
Screen Display - ELAPSED TIME
Screen Display - USER PROGRAM
Description: The TIMER can be set to count down and alarm when
it reaches zero. It will reset to zero whenever the grill is turned off.
Settings: Press and hold the SET button for 3 seconds. Minutes will
flash.Press SELECT and hours will flash. Use arrow buttons to
adjust to desired time. Press the SET button again to accept. Once
the timer displays the desired time use the SET button again to
START & STOP the timer. When the timer reaches zero an alarm
will sound and the screen will flash until any button is depressed.
When the grill is turned off all alarms will reset to OFF. Press and
hold the SET button for 3 seconds to reset the timer back to zero.
Description: The ELAPSED TIME is a count-up timer which shows
the total length of cooking time. It will reset to zero whenever the
grill is turned off.
Settings: Press the SET button to start the ELAPSED TIME, press
again to stop. Press and hold the SET button for 3 seconds to reset
the timer back to zero.
Each USER PROGRAM allows you to program up to 5 separate cooking
steps.
To set up any USER PROGRAM, press either arrow button to reach
USER PROGRAM 1,2 or 3
?