Owner`s manual

MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-429-2G
18
Settings:
Description:
Settings:
Note:
There are no user settings for this feature.
This screen appears when you turn the ON/OFF switch to
OFF. The controller will run the fan on high speed until the temperature in
the grill drops to 160 degrees. It will then switch to a 4 minute countdown-
timer and entirely shut the unit OFF. This feature is designed to help burn
up all remaining pellets in the fire pot and give you a clean start the next
time you cook. Simply turn the grill off and let the PELLET BOSS™ do the
rest!
There are no user settings for this feature. If you wish to
override the SHUT DOWN mode just press any button and the unit will
turn off.
Videos of the installation process for the Remote Boss are
available on the MAK GRILLS website, www.makgrills.com. Click on the
videos link on the front page.
Unplug the grill from the electrical outlet.
Remove the fan panel from the grill.
Locate the plug-in for the Bluetooth module. The plug is located at the top
center on the rear of the Pellet Boss control. (Note to facilitate this step,
you may choose to remove and un-plug the Pellet Boss and remove it
from the grill).
When installing the Bluetooth module, make sure that the “pin gap” is
facing left. If you have removed the Pellet Boss from the grill, please
reinstall it, making sure you attach the plugs to their correct connections
on the back of the board.
Push the antenna plug through the hole below the Pellet Boss control.
The hole is located to the left of the power cord.
Attach the antenna module by screwing it into the antenna plug.
Turn on your Remote Boss. You should see it connect up with your Pellet
Boss within 10 seconds.
Now You're Ready To Grill WIRELESSLY!
COOL & SHUT DOWN
HOW TO INSTALL REMOTE BOSS WIRELESS CONTROL