User manual
14
MIDI-Controlled MIDI Clock Sync’d
Glide/PORTAMENTO
Using MIDI CC 5 and 65, analog, fully programmable,
clock-synchronized PORTAMENTO is possible.
Portamento ON/OFF CC 65= 0 - OFF; 1-127 = ON
Portamento TIME CC 5 = 0-127; 0= OFF; 1-127= Time interval
Note: Portamento is in 64ths of the main clock. A setting of 50%
makes the 0-COAST take a whole clock pulse to arrive to the next
note. If the clock or CC 5 changes during Portamento, it adjusts
so that it is possible to fully automate this feature.
Note: For either CC 5 or CC 65, 0 is the same as OFF.
For sync to MIDI Clock, MIDI Clock must be set to ON at 0-COAST.
(MIDI Clk=114, 0-OFF, 1- ON).
Max 4 Live Page Programmer
Please note we have created a Max 4 Live Device
called Make Noise 0-Coast Page Programmer.amxd,
which makes programming the 0-COAST from
Ableton via MIDI very simple. If you use Max 4 Live,
have a look:
www.makenoisemusic.com/synthesizers/ohcoast
Editing Other PGM Page Parameters using MIDI CC:
While the 0-COAST is in the PGM Pages it is also possible to program the 0-COAST PGM Pages using MIDI CC messages. NOTE:
these parameters can only be edited by CC while the 0-Coast is in the Program Pages. The 0-COAST will ignore these CC messages
at all other times. There are also some additional parameters tha may be edited by MIDI CC. These are Pitch Bend, AfterTouch
and Velocity Scale and TEMPO IN Divisor. Here is a list of CC#’s for doing so:
ArpON/OFF=117 Turns Arpeggiator ON/OFF 0-OFF; 1 to 127 is ON
ArpType=119 Selects Arpeggiator type 0-Traditional; 1 to 127-Latch & Shift.
LegatoControl=118 Turns Legato ON/OFF 0 -OFF; 1 to 127-ON
MIDI A Channel =102 Selects MIDI A Channel Value of 0-15 sets a channel; 16-127 is MIDI CH. ALL
MIDI B Channel=103 Selects MIDI B Channel Value of 0-15 sets a channel; 16-127 is MIDI CH. ALL
MIDI CH. A CV=104 Sets what comes out of the channel’s CV output. 0-Note; 1-velocity; 2-mod; 3 to 127 LFO (rate set by CLocK OUT)
MIDI CH. B CV=105 Sets what comes out of the channel’s CV output. 0-Note; 1-velocity; 2-mod; 3 to 127 LFO (rate=<TAP> PGM_A)
MIDI CH. A Gate=106 Sets what comes out of the channel’s Gate output 0-Note ON; 1-Velocity > 50%; 2-ModWh. > %50; 3 to 127 LFO
MIDI CH. B Gate=107 Sets what comes out of the channel’s Gate output 0-Note ON; 1-Velocity > 50%; 2-ModWh. > %50; 3 to 127 LFO
PitchBendScale CH. A=108 Amount of bend in semitones, centered on active pitch (so 1/2up, 1/2 down)
PitchBendScale CH. B=109 Amount of bend in semitones, centered on active pitch (so 1/2up, 1/2 down)
AfterScale CH. A=110 Aftertouch in semitones
AfterScale CH. B=111 Aftertouch in semitones
VelScale CH. A=112 Sets Minimum Velocity value
VelScale CH. B=113 Sets Minimum Velocity value
MIDIClk=114 Turns MIDI Clock ON/OFF 0- OFF; 1- ON
TEMPO IN Div.=116 0 to 127 Divisions of the TEMPO IN as reected at the CLOCK OUT. 0 and 1= 1/1; 2 = 1/2; 3 = 1/3; 4 = 1/4; etc.
Does not aect tap tempo or MIDI Clock.
For more information on MIDI standards, please visit www.midi.org