User guide

Patch Ideas (cont’d)
Typical Voltage Controlled Twangdoodle
Patch Pressure Points common Gate Out to René X-Clk, and Pressure Points Gates 1 and 3 to Y-Clk. Set René to
Cartesian mode and enable all steps on the Access page. Program a sequence with lower notes toward the bottom
of the René grid, and higher notes toward the top.
Patch René X and Y gates to EXCITE inputs on Mysteron. Engage Quantize mode and patch René QCV to Mysteron
Pitch2 input.
Play Pressure Points and René. Think of Pressure Points as your "pick" hand and René as your "fret" hand. Pressure
and tuned voltage outputs can be utilized to other Mysteron parameters for more complex control, "palm mutes",
harmonics etc.