User manual

4
Electrocution Hazard!
bus board connection cable cable.
Do not touch any electrical terminals when attaching any Eurorack bus board cable.
The Make Noise Pressure Points is an electronic music module requiring 20 mA of +12VDC and 0mA of
-12VDC regulated voltage and a properly formatted distribution receptacle to operate. It must be properly
installed into a Eurorack format modular synthesizer system case.
Go to http://www.makenoisemusic.com/systems.shtml for examples of Eurorack Systems and Cases.
board connector cable on backside of module (see picture below), plug the bus board connector cable into
the Eurorack style bus board, minding the polarity so that the RED stripe on the cable is oriented to the
NEGATIVE 12 Volt line on both the module and the bus board. On the Make Noise 6U or 3U Busboard, the
negative 12 Volt line is indicated by the white stripe.
The Pressure Points module is not compatible with power solutions using the MeanWell brand AC
Adapters. The Pressure Points module will not work on power solution using the MeanWell brand AC
Adapters. Make Noise will not be able to provide support for Pressure Points modules used on power
solutions using the MeanWell brand AC Adapters.
supply.
-12V