Limited WARRANTY: Make Noise warrants this product to be free of defects in materials or construction for a period of one year from the date of purchase (proof of purchase/invoice required). Malfunction resulting from wrong power supply voltages, backwards power cable connection, abuse of the product or any other causes determined by Make Noise to be the fault of the user are not covered by this warranty, and normal service rates will apply.
Installation: The Make Noise Teleplexer is an electronic signal router requiring 20mA of +12V and 20ma of -12V regulated power and properly formatted distribution receptacle to operate. It is designed to be used within the euro format modular synthesizer system. Go to http://www.doepfer.de/a100_man/a100t_e.htm for the details of this format.
Overview: The Teleplexer is a telegraph style multiplexer. You likely know what a telegraph is, but have you considered the musical value of the telegraph? As the building blocks of synthesis are a by-product of communications technologies, why not look to telegraphy for inspiration? The speed and agility telegraph operators displayed relaying life-altering messages across the world was staggering toward some form of future musical genius. In musical applications a multiplexer is type of signal router.
1 2 3 6 7 4 5 9 10 13 11 12 14 15 8 1 2 1+2 1+2+3 17 3+2+1 18 3+1 20 22 23 2+3 1+3 16 19 21 3 2+1 1 3+2 2 3 Teleplexer Interface 1. 2. 3. 4. 5. 6. 7. 8. 9. Aux. IN CH. 1: direct coupled signal input, continuously added to CH. 1 Aux. IN CH. 2: direct coupled signal input, continuously added to CH. 2 Aux. IN CH. 3: direct coupled signal input, continuously added to CH. 3 OUT CH. 1: direct coupled signal output for CH. 1 OUT CH. 2: direct coupled signal output for CH. 2 OUT CH.
1 3 2 6 7 4 5 9 10 13 11 12 14 15 8 1 2 1+2 1+2+3 17 3+2+1 18 3+1 20 22 23 2+3 1+3 16 19 21 3 2+1 1 3+2 2 3 Output Channel Routing 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
Source Cables These are cables where one end of the cable is patched to the output of a signal generator/ processor in the modular system and the other end is not patched. The tip of the Source cable is touched to the surface of the TELEPLEXER at the location and time of the desired patch connection. When the tip of the source cable is removed from the surface of the TELEPLEXER, the patch connection is broken and ended.
Patch Ideas: Coming soon!