User manual

13
Machine Programming
There are two types of MACHINE Programming: Variable Clock Multiplier/Divisor and Phase.
Variable Clock Multiplier/Divisor Programming requires a combination of pressing and holding buttons in order to adjust
the associated Variable Clock Outputs:
For Variable Clock Divisor Coarse adjustment:
[HOLD] PGM_A
+
[TAP] Associated
CHannel Button(s)
1-32 times
[HOLD] PGM_B
+
[TAP] Associated
Channel Button(s)
1-32 times
For Variable Clock Multiplier Coarse adjustment :
The user holds PGM_A and taps the desired
Channel Button (1-32) times in order to Program the
associated Variable Clock Output. It is possible to tap
Channel Buttons1-6 simultaneously in order to
Program several Channels at once. The TEMPI counts
the taps and sets this number as the Divisor value for
each Channel. If (32) taps are exceeded, the count
stays at maximum number of (32) and the counting of
subsequent taps is stopped. Changes take place as
soon as PGM_A is released.
The State LED lights red to indicate a Variable Clock
Divisor Coarse adjustment. Previous values for a given
Channel are overwritten as soon as the associated
Button1-6 is pressed while holding PGM_A.
Note: To return to a 1:1 relationship with Leading
Tempo (Default), hold PGM_A or PGM_B and press
the associated CHannel Button1-6 once.
The user holds PGM_B and taps the desired
Channel Buttons (1-32) times in order to Program the
associated Variable Clock Outputs. It is possible to
[TAP] BUTTON(s)1-6 simultaneously, in order to
Program several CHannels at once. The TEMPI counts
the number of and sets this as the Multiplier value. If
(32) taps are exceeded, the count stays at maximum
number of (32) and the counting of subsequent taps
is stopped. Changes are made once PGM_B is
released.
The State LED lights green to indicate a Variable Clock
Multiplier Coarse adjustment. Previous values for a
given Channel are overwritten as soon as the
associated Button(s)1-6 is pressed while holding
PGM_B.
To return to a 1:1 relationship with the Leading
Tempo (Default), hold PGM_A or PGM_B and press
the associated Channel Button1-6 once.