User manual
Table Of Contents
18
Mod Enable
Please note: these changes ARE NOT SAVED until you Store the State. Without running the Store operation, changes
ARE NOT held when the power is cycled. This is useful for improvising with alternate versions of a Stored theme.
Not Jumbled Shift = O
Jumbled Shift = Red
[Press] Button4 for Shift:
[Press] Button5 for Run / Stop
Progam Edit
[Double Press] PGM_B
Red
Blue
Purple
O
=
=
=
=
[PRESS] Button-6 for Jumbled Shift:
MOD
SETTINGS
Run/Stop
Run/Stop All
Alt Run
O
= Red
= Blue
= Purple
= O
CW
CCW
Random
O
MOD enabled,
Active
= PURPLE
= PINK
MOD disabled,
Muted
MOD disabled,
Active
= RED
= BLUE
MOD enabled
and
Muted
The Mod function allows you to Program Shift or Run/Stop behavior. To Program the Mod function, press PGM_B to access the
Mod Page, indicated by the PGM_B LED. While on the Mod page, State changes are ignored. To Mod Enable a Channel, press its
associated Channel Button. Channels that are Active and Mod Enabled are purple. Channels that are both Mod Enabled and
Muted appear pink. If a Channel is Mod disabled, it is either Blue or Red. All Channels will continue to ash to indicate
currently-Programmed Variable Clock.
To exit the Mod Page, press PGM_B again.
While Human or Machine Progamming, Mod remains disabled until
Programming is completed. This behavior may be used creatively
in order to manually "freeze" the Mod functionality.
In order to easily create interesting timing arrangements, it is
possible to Mod Program several Channels at once. The Mod
function is determined by the Programming of the Mod Settings in
the Program Edit page.
The Mod Input aects the TEMPI according
to the Shift Behavior (causes timing information to move between
Mod-enabled Channels at each new Gate) and Run/Stop (causes
some or all Channels to Run, Stop, and/or Reset). The Mod LED
ashes Magenta to indicate a Mod function has been performed.
If both Shift and Run/Stop are enabled, then the State Select
Gate Input is used for Shift and the Mod Input for Run/Stop.
When only one behavior is enabled, the Mod Input is used for
the selected behavior.
(must have Run Stop Enabled)
(must have Shift Enabled)