User manual

26
Free / Follow
While on the Bank Edit Page, press Button-3 to set the TEMPI to Follow the Tempo and Select Busses. The TEMPO LED changes to
GREEN in order to indicate Follow. Press BUTTON-3 again to set TEMPI to be Free of the Tempo and Select Busses, indicated by the
Blue Tempo LED.
Bank Edit Settings (CONT’d)
Free
Tempo LED = BLUE
Follow
Tempo LED = GREEN
While set to Follow, the TEMPI receives messages from the Select Bus that help determine the State and a Clock from the Tempo
Bus to determine the Leading Tempo. It does not transmit messages. The Panel Controls for State and Tempo are still useful
when the TEMPI is set to Follow. The State Select CV and Gate allow for osetting and modulating around the State that is
selected by the Select Bus. The Tempo Bus may be completely overridden by patching a Clock to the External Tempo Input, thus
allowing for an independent Leading Tempo.
Please note: changes ARE NOT saved until you go to the Bank Edit Page and press Button-2 to Store All Banks. Without
running the Store All Banks operation, changes are held only until the power is cycled. This is useful for improvising
alternate versions of a theme.