Datasheet

RB-Mab-75
Makeblock Me Waterproof Temperature Sensor
This is the temperature sensor based on chip DS18B20 consisting of a waterproof probe and long wire
shape, which is perfect for immersive temperature detectionor detectingg something far away.The
DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only
one wire (and ground) needs to be connected from a central microprocessor. The original one includes
three wires inside, it has been adjusted into a 3-pinconnector so that you can use it simply with
Makeblock Me Adapter.
Features
• Waterproof
• Uses 1-Wire interface- requires only one digital pin for communication
• Stainless steel tube 6mm diameter by 35mm long
Specifications
• Power supply: 3.0V to 5.5V
• ide temperature range: -55°C to +125°C
• High accuracy: ±0.5°C( -10°C to +85°C)
• Dimensions: Probe is 6mm in diameter and roughly 50mm long. Overall length (including wire)
is 0.5 meter