Starter Robot Kit Robot Tank Three-Wheeled Robot Car MAKER WORKS TECHNOLOGY INC Technical support: support@makeblock.cc www.makeblock.
Quick Guide Please visit http://learn.makeblock.cc/starter-robot-kit/ to view the build and programming guide. Warning: Keep this kit out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Makeblock Starter Robot Kit contains mechanical parts and electronic modules for you to start exploring the robot world which can be used to build a robot tank or a three-wheel robot car. It is also a great tool to learn mBlock and Scratch programming.
Parts List 1× Beam 0824-96 2× Threaded Shaft 4×39mm 1× Beam 0824-128 2× Shaft Collar 4mm 2× Beam 0824-144 1× Bracket 3×3 1× Cross Screwdriver 1× Plate 3×6 2× BaseBracket 1× Battery Holder for (6) AA 4× Flange Bearing 4×8×3mm 1× Hex Screwdriver 2× DC Motor-25 2× Motor Cable 1× Bracket P3 2× Hex Allen Key 1.
Build the Robot Tank 4× 2× 1 2× 2× 4× 2× 4× 2× 2 2× Screw M4×14 3 4
Tips:Identify the right mechanical parts from similar ones with different hole quantity included.
36× 6 1× 36× 7 1× 1× 2× 2× 2× 8 2× Screw M4×22 7 8
1× 1× 1× 6× 2× 1× 14× 9 10 8× Screw M4×8 1× 4× 4× 2× Screw M4×22 2× 11 DC Motor-25(M1) DC Motor-25(M2) 4× Screw M4×8 9 6× Screw M4×8 10
Wiring Control with App To reduce the electromagnetic interference, please add ferrite ring for the wires which connected to motors. 1、Download and install Makeblock HD app by either way below. A. Download Makeblock app at http://app.makeblock.cc/. B. Scan QR code below to download Makeblock app. (Figure 1) 2 、 Check wiring, make sure everything is correct, and then turn on the power of your robot. 2× 2× 2× 2× 3、Turn on the Bluetooth of your smart device.
Build three-wheeled Robot Car 2× 2× 1 4× 2× 2× 4× 2 2× Screw M4×14 13 14
2× 3 1× 1× 1× 2× 4× 4× 6× 4 4× Screw M4×14 4× Screw M4×8 2× Screw M4×22 15 16
2× 5 17 1× 1× 2× 6 18
1× 2× 2× 1× 7 8 1× 2× 2× 2× 2× Screw M4×22 2× Screw M4×8 19 20
Programming--Further Please follow page 11 for wiring and app operation. exploration Working with mBlock--Hack the Physical World 1× 1× 1× 6× 2× 14× The Starter Robot Kit support mBlock perfectly which allow you reprogramming your robot by simply drag and joint the blocks of mBlock. No more difficult coding. 9 mBlock is a free modified version of Scratch 2.
Electronic modules on makeblock--Further Kits on Makeblock--Further exploration Me Sound Sensor can measure the volume.It can used in some sound interactive projects,such as an voice operated switch. Ultrasonic module works for measuring distance from 3cm to 400cm. exploration Add-on Pack for Starter Kit http://learn.makeblock.cc/ultrasonic-sensor/ Me 7-Segment Display is a display module with four digit tube which can show some data ,such as speed ,time ,score etc.