D1.1.
USER MANUAL Starter Robot Kit Robot Tank Bluetooth Version Three-wheeled Robot Car
Quick Guide Warning: Keep this kit out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Makeblock Starter Robot Kit contains mechanical parts and electronic modules for you to start exploring the robot world which can be used to build a robot tank or a three-wheel robot car. It is also a great tool to learn mBlock and Scratch programming.
Parts List Pictures for Reference Only 1× Beam 0824-96 2× Threaded Shaft 4×39mm 6× Nylon Stud M4×30 2× Beam 0824-144 4× Flange Bearing 4×8×3mm 1× Battery Holder for (6) AA 1× Beam 0824-128 1× Bracket 3×3 1× Plate 3×6 1× Bracket P3 1× Caster Wheel 1× Nut M8 2× DC Motor-25 Bracket 2× Shaft Connector 4mm 4× Timing Pulley 90T 2× Tire 68.5×22mm 36× Track 36× Track Axle 02 2× Shaft Collar 4mm 1× Hex & Cross Screwdriver 1× Hex Allen Key 2.5mm 2× Hex Allen Key 1.
Tool Tips Hex Screwdriver Cross Screwdriver Hex Allen Key 1.5mm Headless Set Screw M3×5 Hex Allen Key 2.
Build the Robot Tank 04
1 4× 2× 2× 2× 4× 2× 4× 2× 2 2× Screw M4×14 05
Tips: Identify the right mechanical parts from similar ones with different hole quantity included.
5 1× 4× 4× Screw M4×14 07
6 08 36× 36× 7
1× 8 1× 1× 2× 2× 2× 2× Screw M4×22 09
8× Screw M4×8 9 1× 1× 1× 6× 2× 14× 6× Screw M4×8 10 10
1× 11 1× 4× 4× 2× Screw M4×22 2× DC Motor-25(M1) 4× Screw M4×8 DC Motor-25(M2) 11
Wiring Battery Holder( 6 x AA batteries , not included ) The normal operating voltage range of Orion is 6~12V; when the motor is found to operate poorly or have abnormal system operation, please inspect whether the power supply voltage is normal; if the power supply voltage is too low, please replace the power supply. 2× 2× 2× To reduce the electromagnetic interference, please add ferrite ring for the wires which connected to motors.
Working with Remote Control Construct It Once, Control It Everywhere Software Download A tablet or smartphone is required to control the Starter. Download from App Store Search "Makeblock" and install the application from App store. Download from Official Website http://learn.makeblock.com/en/software/ Login to download the corresponding version of application. Controls Step 1:Follow the instructions on the first page of User Guide to download and install the application.
Build Three-wheeled Robot Car 14
1 2× 2× 4× 2× 2× 4× 2 2× Screw M4×14 15
3 2× 1× 1× 1× 2× 4× 6× 4× Screw M4×8 2× Screw M4×22 16
4 4× 4× Screw M4×8 17
5 18 2×
6 1× 1× 2× 19
7 1× 2× 2× 2× Screw M4×8 20
8 1× 1× 2× 2× 2× 2× Screw M4×22 21
Please follow page 12 for wiring and remote control.
Programming Further Exploration Working with mBlock--Hack the Physical World The Starter Robot Kit support mBlock perfectly which allow you reprogramming your robot by simply drag and joint the blocks of mBlock. No more difficult coding. mBlock is a free modified version of Scratch 2.0 developed by MIT Media Lab, mBlock add some hardware-related blocks in the original Scratch, with these blocks, users can read sensors, control motors and even a whole robot.
Electronic Modules on Makeblock Ultrasonic module works for measuring distance from 3cm to 400cm. Me Sound Sensor can measure the volume.It can used in some sound interactive projects,such as an voice operated switch. Me 7-Segment Display is a display module with four digit tube which can show some data ,such as speed ,time ,score etc. Me Temperature Sensor is a stainless steel tube sensor which is used for measuring temperature. Me RGB LED module contains four programmable RGB LEDs.
Kits on Makeblock Further Exploration mBot-Educational robot kit XY Plotter Ultimate 10-in-1 Robot Kit 25