Data Sheet

RB-Mab-31
Makeblock Me Ultrasonic Sensor
The Me - Ultrasonic Sensor is widely used for rang sensor. It has one 4 Pin RJ10 connector, with
Ground, 5V, one digital signal, and an open pin. It can detect as long as 400cm distance with 1cm
resolution. The Me - UltraSonic Sensor module is designed for distance measurement or obstacle
avoidance of the robotics.
Features
• 5VDC power supply
• 4 Pin RJ10 interface and 2.54mm breakout pins
• Compatible with Me - Base Shield
• Detecting range: 3cm~4m, best in 30 degree angle.
• LED indicator: D1 (Red LED) - Power indicator.
Usage
• As the Yellow tag illustrated, the Me - UltraSonic Sensor can be connected to the port 3, 4, 5, 6,
7 or 8 of the Me - Base Shield by a telephone wire.