Data Sheet

In Serial Setup page, you can set the baud rate and port number.
Baudrate: the serial baud rate for communicating with the main control board.
Port: Set the port number. (It’s not recommended setting the port number as 333
since it’s the broadcast number).
Diagram 3
In Join Setup page, you can select the network you want, then enter the name and
its password.
AP: Copy/enter the name of the network you want to connect to. (You can see all
the Wi-Fi names the Wi-Fi module has found in the AP list)
Password: Enter the password of the network you choose.
3.2 Connect PC to Wi-Fi Module
AP mode refers to hotspot mode which requires no router connection.
Open software USR-TCP232-TesT, and make sure your computer has already
connected to the Wi-Fi generated by the Wi-Fi module before opening the software.