User Guide

XY Plotter V2.0-mDraw
27 / 34
Load in BMP file, mDraw will pop out a dialogue for converting SVG file. Follow the prompts,
BMP file can be converted into SVG file.
Load in SVG file, drawing is as follows.
4. Setting
（1） XY Plotter V2.0
a. Check and make sure all wiring is correct. Connect robot to computer via USB cable.
3
b. Choose XY as robot configuration, select the correct COM port, click “connect”, and then
click “Update Firmware”).
4
3
For Bluetooth connection, please be sure that you’ve installed the Bluetooth driver software in computer.
4
You need to click “update firmware” for the first time you use a new configuration, and each time you switched
robot configuration.