Portable Label Printer M/N: P20A User Manual Pinsheng technologies Co.
Table of Contents Statement ________________________________________________________ 3 Safety Instructions ________________________________________________ 4 1. General ________________________________________________________ 6 1.1 Introduction ________________________________________________________ 6 1.2 Main Features _______________________________________________________ 6 2. Main Technical Parameters ________________________________________ 7 2.
Statement The User Manual shall not be modified without permission, and Chongqing Pinsheng Technology Co., Ltd. (hereinafter referred to as Chongqing Pinsheng) reserves the right to change the technology, spare parts, software and hardware of the printer. For any more details related to products, please contact with Chongqing Pinsheng or its agent. Any chapters of the User Manual shall not be copied or transmitted by any means or manners without written permission from Chongqing Pinsheng.
Safety Instructions Please read through the following before using printer: 1. Safety Warnings Warning: printer head is heating part, so please don't touch it and its surrounding parts during and after printing. Warning: don't touch the printer head and connector to avoid damaging it due to static electricity. 2. Notes 1) Reserve enough space around the printer for the convenience of operation and maintenance. 2) Keep the printer away from water.
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1. General 1.1 Introduction P20 series portable label printer is capable of printing several specifications of labels and of paper cutting function; and it can be connected to PC and mobile devices for editing and printing and meet the personalized demands. It also provides the driver available for WINDOWS XP /WIN 7 /WIN 10. 1.2 Main Features ◆ 180DPI high-precision printer head; 3/4 in.
2. Main Technical Parameters 2.1 Specifications Item Parameter Printing method Thermal transfer printing Resolution 180DPI Printing width 18mm Printing speed 20mm/s Paper detection Communication interface Photoelectric sensor Paper cutting Manually Bar code Code39/128, Codebar, EAN13/8/128, UCC-128, PDF417, QR Code2 Medium type Die-cutting label, continuous label Max. capacity 10m Length of ribbon 10m Power supply Input DC 5V 2.
3. Appearance and Components 3.
3.2 Functions of Main Components A ---- Power button (1): press and hold it for 3 seconds to turn on or off the printer; B ---- Paper feeding/pause (3): When the printer is on but not printing, press it to deliver a discontinuous label paper or continuous label paper, and then pause; When the printer is printing, press it to finish printing the current label paper and then pause, and re-press it to continue printing.
4. Printer Setting 4.1 Printer Unpacking Unpack the printer to check if there is missing or damaged part against the packing list. If any, please contact the agent or manufacturer. 4.2 Charging (TYPE-C USB) 1) Connect TYPE-C USB cable and power adapter, and the power plug in the TYPE-C interface on the back of the printer; 2) Connect the input power of the power line. Notes: ☆ When handling the plug, hold its connector shell and do not pull at the cable.
4.5 Installation / Un-installation of Printer Driver The driver V1.0.1 is applicable for: Xp, Win7 32bit and 64bit, Win10 32bit and 64bit, Win2003 32bit and 64bit, and Win2008 32bit and 64bit 1. Double click the driver folder 2. Double click the installation (un-installation) file 3. Finish installation (un-installation) Note: if installation failed, restart your computer, run un-installation file, and then run installation file again. 5. Starting and Printing of Printer 5.
5.2 Printing The printer can be connected to PC or mobile devices. Before printing, use professional editing software/APP to edit the contents to be printed. PC: connect the printer and PC with a USB cable, select a template in editing software or set the label specification, edit the label page and then print. Mobile devices: install “Wewin” APP, click to enter it, download a template, edit the contents to be printed, connect to the printer and then print.
7. Common Fault Handling and Maintenance Notes: In case of fault, the following method may be used for handling. If you still can't troubleshoot it, please contact the agent or manufacturer. Where the state indicator is red, it means that the printer is abnormal, so please troubleshoot according to the error state from PC/mobile devices. Indicator State Red indicator flashes Yellow indicator is constant on.
