User's Manual

Page 10 of 13
4. Printer Setting
4.1 Printer Unpacking
Unpack the printer to check if there is missing or damaged part against the packing list. If any,
please contact the agent or manufacturer.
4.2 Charging (TYPE-C USB)
1) Connect TYPE-C USB cable and power adapter, and the power plug in the TYPE-C interface
on the back of the printer;
2) Connect the input power of the power line.
Notes:
☆ When handling the plug, hold its connector shell and do not pull at the cable.
☆ Don’t drug the power line, otherwise damage the cable and cause fire and electric shock.
☆ Don't place the power around the overheating device, otherwise the cable surface will be
molten and accordingly cause fire and electric shock.
☆ If you do not use the adapter for a long time, please disconnect the power line.
4.3 Connecting Interface Cable (TYPE-C USB)
1) Confirm that the printer is on;
2) Insert the interface cable into the matching interface;
3) Connect the other end of the interface cable to the computer host.
4.4 Consumables Installation/Replacement
For replacing consumables, firstly open the cover of printer, take out the label box from point a
and point b (as shown below), and put the new box into the printer and press it to the bottom.
Note: when putting the box, keep one side of the box toward the paper outlet.