WB51R- WT Series Label Printer User Manual Pinsheng technologies Co., Ltd.
Table of Contents Statement ________________________________________________________ 2 Safety Instructions ________________________________________________ 3 1. General ________________________________________________________ 4 1.1 Introduction ________________________________________________________ 4 1.2 Main Features _______________________________________________________ 4 2. Main Technical Parameters ________________________________________ 5 2.
Statement The User Manual shall not be modified without permission, and Pinsheng technologies Co., Ltd. (hereinafter referred to as Pingsheng) reserves the right to change the technology, spare parts, software and hardware of the printer. For any more details related to products, please contact with Pingsheng or its agent. Any chapters of the User Manual shall not be copied or transmitted by any means or manners without written permission from Chongqing Pinsheng.
Safety Instructions Please read through the following before using printer: 1. Safety Warnings Warning: print head is heating part, so please don't touch it and its surrounding parts during and after printing. Warning: don't touch the print head and connector to avoid damaging it due to static electricity. 2. Notes 1) Reserve enough space around the printer for the convenience of operation and maintenance. 2) Keep the printer away from water.
1. General 1.1 Introduction WB51 series label printer is capable of printing wristband, label and RFID wristband; and it can be connected to PC or other mobile devices via Bluetooth or WiFi for printing, and meet your personalized demands. It also provides the drivers in WINDOWS XP / WIN 7 / WIN 10. 1.
2. Main Technical Parameters 2.1 Specifications Item Printing Bar code Media Power adapter Parameter Print method Direct Thermal Resolution 300DPI Print width 56mm Print speed 100mm/s Paper detection Communication Photoelectric sensor USB, Bluetooth/WiFi (optional), ethernet Bar code Code39/128, Codebar, EAN13/8/128, UCC-128, PDF417, QR Code2 Medium type Media roll outer diameter Media roll inner diameter Input Wristband, label and RFID wristband Output Max. 100mm Min. 25.
3. Appearance and Components 3.
3.2 Functions of Main Components Power switch: When the switch is set at “-”, the power is on; and when the switch is set at “○”, the power is off: Touch button: When the printer is on but not printing, press it to feed a gap label or continuous label, and then pause; When the printer is printing, press it to finish printing the current label paper and then pause, and re-press it to continue printing.
4.4 Media Installation/Replacement 1. Take out media roll 2. Open the upper cover 3. Open splints and install media roll, 4.
5. Close the cover Notes: 1. The surface to be printed on should be upward) 2. Place the media to fully cover the rubber roll. 4.5 Installation of Printer Driver Visit www.makeid.cn to download WB51 driver corresponding to your system 1. Double click the driver folder 2. Double click the installation (un-installation) icon 3. Finish installation (un-installation) Note: if installation failed, restart your computer, run un-installation, and then run installation file again. 4.
3. Wait for 3-5 minutes and that the anhydrous ethanol completely evaporates, install the label box. Notes: 1. For the printer's daily maintenance, make sure that the power is off; 2. The print head is a heating part. 3. Neither touch the surface of the print head with hands or metal objects nor scratch the surface of the print head, printing rubber roll and sensors with tweezers or other tools. 4. Do not use gasoline, acetone and other organic solvents; 5.
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
