User's Manual

Page 7 of 12
3.2 Functions of Main Components
Power switch:
When the switch is set at “-”, the power is on; and when the switch is set at “○”, the power is off:
Touch button:
When the printer is on but not printing, press it to feed a gap label or continuous label, and then
pause;
When the printer is printing, press it to finish printing the current label paper and then pause,
and re-press it to continue printing.
Open button:
Press it to open the upper cover, and raise up the print head
Connection indicator:
If any device is connected to the printer via USB, Bluetooth or WIFI, it will be constant on; if no,
it will be off.
Media-out indicator:
If no media detected, it will be constant on; else, it will be off.
Exception indicator:
In case of paper jam, high temperature of print head, RFID writing exception, it will blink; and
when the cover is open or the printing is paused, it will be off.
4. Printer Setting
4.1 Printer Unpacking
Unpack the printer to check if there is missing or damaged parts against packing list. If any,
please contact the agent or manufacturer.
4.2 Connecting of Power Supply
1) Connect the power adapter with socket cable, insert DC output terminal to printer , and power
terminal to socket;
2) After confirm that the input power is on, set the power switch at “-”.
Notes:
☆ When handling the plug, hold its connector shell and do not pull at the cable.
☆ Don’t drag the power line, otherwise damage the cable and cause fire and electric shock.
☆ Don't place the power around the overheating device, otherwise the cable surface will be
molten and accordingly cause fire and electric shock.
☆ If you do not use the adapter for a long time, please disconnect the power line.
4.3 Connecting of USB Cable
1) Confirm that the printer is on;
2) Insert the USB TYPE-B into the printer;
3) Connect the USB TYPE-A to the computer .