M2 Assembly Guide 2_0

29
M2 ASSEMBLY GUIDE
3. LOGIN:
To use Makerverse, you must create an account. Create an account and verify your email
address. You can login to your makerverse account from any device!
4. CREATE A WORKSPACE FOR YOUR M2:
A workspace holds a connection to a single machine. It knows how to communicate with the
machine (what port the machine uses, for example). It will run your cuts and generally be the
home of your machine.
A workspace does not store machine settings. In almost every case, your machine itself
stores things like the calibration settings. This means that you can detach the machine from
the USB port and safely connect it to a different computer (running Makerverse, or any other
program compatible with your machine) and the machine will continue to function.
Click “Connect to a New Machine” and then choose “Maslow M2” to get started.
OPERATION & CALIBRATION PART 3: CALIBRATION AND HOW TO USE THE MACHINE
CONTROL APPLICATION MAKERVERSE
1. DOWNLOAD:
You need a machine control application (also known as a Gcode sender). We suggest our
Makerverse for your M2 and many other CNC machines. It’s based off the open source
CNCjs software. Coming soon to the Windows and Apple Stores, you can download it for your
Windows, Mac, or Linux computer here: http://www.makerverse.com/
Drew’s Note: If using a version of Makerverse before 1.1.2, you must uninstall it from your computer and reboot for version 1.1.2 to
work correctly. You will also need to update your firmware. Instructions can be found here.
2. OPEN MAKERVERSE:
Click “allow program” to open. It is pending release in the Windows and Mac App Stores. An
account is not required, but you may set one up later.
This work is licensed under the creative commons Attribution
Non Commercial-No Derivatives 4.0 International license. Last Updated 1.18.2021
Version 2.0