M2 Assembly Guide 2_0

30
M2 ASSEMBLY GUIDE
5. CHOOSE SLED:
Choose the “Standard 18-inch Circle” for your M2.
6. CONNECT YOUR M2:
Plug your M2 USB into your computer and the power plug into the socket. Click the drop
down menu and choose the port that reads “Arduino LLC” and click connect!
Drew’s Note: If you don’t see your M2 right away, click the refresh button next to connect.
You will see data fill the screen when it connects.
This work is licensed under the creative commons Attribution
Non Commercial-No Derivatives 4.0 International license. Last Updated 1.18.2021
Version 2.0