Manualshelf

M2 Assembly Guide 2_0

ManualsBrandsMaker Made ManualsRoboticsM2 Automated Cutting Machine Kit
29303132333435363738
31
M2 ASSEMBLY GUIDE
7. VERIFY CONNECTION AND FIRMWARE
You will know your M2 is connected when you see the information about your machine fill out
around the connection screen.
Verify that your firmware on the bottom tab is the same as the link: v20200915. If it is a lower
number, follow this link to flash your board to the current version, or your M2 will not connect.
8. CREATE WORKSPACE:
You can name your machine’s workspace and click “Create Workspace”. Icons and
background customization will be in available in a future update.
This work is licensed under the creative commons Attribution
Non Commercial-No Derivatives 4.0 International license. Last Updated 1.18.2021
Version 2.0