M2 Assembly Guide 2_0

33
M2 ASSEMBLY GUIDE
OPERATION AND YOUR FIRST CUT
After calibration, you are ready to cut! Here are the instructions over how to cut with your M2.
1. UPLOAD GCODE:
Click “Upload Program” and select the Gcode file you created in Easel.
You’ll know your Gcode loaded correctly when Makerverse displays the path of the Gcode you
loaded! You already set the dimensions and depths in Easel for the M2, so it’s ready to start!
We recommend a one foot or one meter square as your first test cut for calibration, set to cut
outside the shape path.
This work is licensed under the creative commons Attribution
Non Commercial-No Derivatives 4.0 International license. Last Updated 1.18.2021
Version 2.0