Installation Guide
*WITH MAKERBOT FILAMENT CASE
MAKERBOT
REPLICATOR Z18
3D PRINTER
MAKERBOT
REPLICATOR
DESKTOP 3D PRINTER
MAKERBOT
REPLICATOR MINI
COMPACT 3D PRINTER
SMALL LARGE XL XXL
* *
COMPATIBILITY
0.45 kg
(1 lb)
0.22 kg
(0.50 lb)
1.75 mm1.75 mm
15.0 cm
(5.90 in)
4 cm
(1.57 in)
5.08 cm
(2 in)
1.36 kg
(3 lb)
0.9 kg
(2 lb)
1.75 mm
25.0 cm
(9.84 in)
4 cm
(1.57 in)
5.08 cm
(2 in)
2.72 kg
(6 lb)
2.26 kg
(5 lb)
1.75 mm
21.59 cm
(8.50 in)
8.89 cm
(3.50 in)
2.54 cm
(1 in)
4.99 kg
(11 lb)
4.53 kg
(10 lb)
1.75 mm
21.59 cm
(8.50 in)
17.78 cm
(7 in)
2.54 cm
(1 in)
21.59 cm
(8.50 in)
17.78 cm
(7 in)
2.54 cm
(1 in)
SPOOL DIAMETER
SPOOL W IDTH
SPOOL HUB HOLE
FILAMENT DIAMETER
SHIPPING WEIGHT
NET W EIGHT
SMALL LARGE XL XXL
DIMENSIONS AND WEIGHTS
MAKERBOT
PLA FILAMENT
TECHNICAL SPECIFICATIONS
®
MAKERBOT PLA
FILAMENT
MakerBot PLA Filament is the
best and most consistent
filament for MakerBot
Replicator
®
Desktop 3D Printers.
Every filament color is Every filament color is
comprehensively quality tested at
both 100-micron and 200-micron
layer resolutions on all MakerBot
Replicator
3D Printers to verify that
the filament will perform every
feature that MakerBot Desktop
software oers.software oers.
If you’re new to 3D printing, MakerBot
PLA Filament is a good material to
start with because it’s easy to use
and performs well on most prints.
MakerBot PLA Filament adheres well
to acrylic and to MakerBot Build Plate
Tape. Prints with a large bottom layer
may have a tendency to curl. To
prevent curling, use rafts.