Troubleshooting guide

3D Printer Guide Makerbot Replicator 2X
4 | P a g e
Overview
Process
You must first create your 3D file using your preferred software. The software must be able to
export either *.OBJ, *.STL, or THING format.
Your object must be in MM (metric) and cannot exceed 24.6cm by 15.2cm by 15.5cm
You will need to download and run the MakerWare software from the MakerBot link below.
http://www.makerbot.com/makerware
Material
Two types of filament: ABS
PLA (tends to warp less)
You will need to provide your own filament. See MakerBot’s website for detailed specifications
(link below).
https://store.makerbot.com/filament
You can use filament from other sources just make sure that the diameter is correct. You may
also get different results based on other manufacturer’s materials density, melt temperature,
quality and other factors.