User manual

4
The terminals of the battery compartment use soft wire
strands, which are stripped and tin-plated at the ends. The
ends can be plugged into the contacts. If possible, they
should only be plugged in once and then remain in their po-
sition, because they easily wear out and soften when plugged
in several times. You can pierce holes in the bottom cover
of the board and pass the wires from below. This facilitates
strain relief and stable attachment. The black cable should be
fitted into contact H23, the red one should be fitted into C23.
Then the position does not have to be changed until the 24th
game. Whenever the game is to be switched off, remove a
battery from the battery compartment.