User Manual

- 2 -
1.2 Notices
1. During the period of operation of the 3D printer and for
a period of time after the end of printing, the temperature
of the nozzle is as high as 200 ℃ or more. So do not touch
the nozzle with your hand.
2. Please follow the instructions in the guide to operate the
machine. If you have any questions, please contact the
after-sales service.
3. If the printed model needs to be disassembled for support,
please wear gloves to avoid being scratched by tools or
supporting materials during disassembly.
4. During daily use, it is necessary to regularly clean and
lubricate the cross slide optical axis of the 3D printer.
Be careful not to drip onto the casing and belt when adding
lubricant.
5. While reading this ‘ User Guide’, Please combine with the
actual operation of the 3d printer, it will be more
conducive to your familiarity with the use of the machine.
6. Please take pictures or videos to reflect the problem more
intuitively in the process of printing. And provide a photo
of the machine number (label on the bottom of the back of
the machine), then contact the after-sales.
7. Suggest to use the original filament.