User Manual

USER MANUAL FOR Wifi V119

The Wifi is between MPPT Controller and Android phones only.

Not the internet or cloud connection.

A. Use your Android phone go to website https://www.makeskyblue.com/pages/android-apk-for-makeskyblue-wifi

And download the V119 Wifi APP.

B. APP installation steps

1. Press INSTALL

2. Trust this app and press OPEN

3. Press OK

4. Location access page

5. Enable Access my location

6. Go to WLAN and find MPPT signal

PAGE 1
USER MANUAL FOR Wifi V119 The Wifi is between MPPT Controller and Android phones only. Not the internet or cloud connection. A. Use your Android phone go to website https://www.makeskyblue.com/pages/android-apk-for-makeskyblue-wifi And download the V119 Wifi APP. B. APP installation steps 1. Press INSTALL 2. Trust this app and press OPEN 3. Press OK 4. Location access page 5. Enable Access my location 6.
PAGE 2
7. Input password 88888888 8. Go to Android desk and open APP 9. Press CANCEL 10. Press FIX PARAMETER to change settings 11. Setting for lead acid battery 12.
PAGE 3
C. If you want to change password after connecting Wifi with default password successfully, then you can change the password as below. 1. Input new password 2. The Wifi signals are saved as this 3. Also can press signal long to reset password 4. If you forget the password, then go to controller and set D05 to cLr MakeSkyBlue (Shenzhen) Technology Co., LTD 1402M, Bldg. C6, Hengfeng Industry Zone Hezhou, Baoan Shenzhen Guangdong 518101 China Tel: 86 755 2331 3263 www.makeskyblue.com sales@makeskyblue.