Use and Care Manual

Page 17 of 54
OPERATION
BEFORE USE
1. Add Engine Oil (New machines will be pre-oiled from
MAKINEX)
1.1 Place Pressure Washer on a flat, level surface.
1.2 Clean area around oil fill and remove oil fill cap.
1.3 Using oil funnel (optional), slowly pour contents
into oil fill opening. (Oil capacity is 1.1L)
1.4 Replace oil fill cap and tighten.
NOTE: IMPROPER treatment of pressure washer can
damage it and shorten its life. DO NOT attempt to crank or
start the engine before it has been properly serviced with the
recommended oil. This may result in an engine failure.
Adding Fuel
WARNING
FAILURE TO USE FUEL AS
RECOMMENDED IN THIS MANUAL WILL
VOID WARRANTY
-DO NOT use unapproved gasoline such as E85 (85%
ethanol/15% gasoline).
-DO NOT mix oil with gasoline.
-DO NOT modify engine to run on alternate fuels.
WARNING
Fuel and fuel vapour are extremely
flammable and explosive. Fire or explosion
from misuse of fuel can cause severe burns
and even death.