Use and Care Manual

Page 20 of 54
3. Connect garden hose to water inlet connector
3.1 Before connecting the garden
hose to the water inlet
connector, inspect the filter
3.2 Run water through your
garden hose for 30 seconds to
clean put any debris
3.3 Release any pressure from
spray gun by pulling the
trigger.
3.4 Connect the garden hose to
the water inlet connector (not
to exceed 15m/50ft in length
and with the inner diameter of
hose no less than 13mm).
3.5 Turn on inlet hose Water
***IMPORTANT***
DO NOT siphon standing water for
the water supply. Use ONLY cold
water (less than 37°C/100°F)
FILTER