Use and Care Manual
Page 21 of 54
4. Adjust valve position to Roto-Clean
WARNING
RISK OF EYE INJURY. SPRAY CAN SPLASH BACK OR PROPEL OBJECTS
Always wear safety goggles when using this equipment or in vicinity of
where equipment is in use.
Before starting the pressure washer, be sure you are wearing adequate
safety goggles.
NEVER substitute safety glasses for safety goggles.
5. Start the engine
Refer to your Honda GX200 Engine Operator’s manual for more details
4.1 Make sure the valve is pointing to
the Roto-Clean position before
starting as this makes sure
pressure is constantly released
before you start the engine and
during initial running.
CORRECT POSITION