Instruction manual cordless lawn trimmer
13 ENGLISH
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
ŹFig.7: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
FDWHWKHUHPDLQLQJEDWWHU\FDSDFLW\7KHLQGLFDWRUODPSV
OLJKWXSIRUDIHZVHFRQGV
Indicator lamps Remaining
capacity
Lighted Off
75% to 100%
50% to 75%
25% to 50%
0% to 25%
NOTE:'HSHQGLQJRQWKHFRQGLWLRQVRIXVHDQGWKH
DPELHQWWHPSHUDWXUHWKHLQGLFDWLRQPD\GLIIHUVOLJKWO\
IURPWKHDFWXDOFDSDFLW\
Switch action
WARNING: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
WARNING: For your safety, this tool is
equipped with the lock-off button which prevents
the tool from unintended starting. Never use the
tool if it starts when you pull the switch trigger
without pressing the lock-off button. Ask your local
0DNLWD6HUYLFH&HQWHUIRUUHSDLUV
WARNING: Never disable the lock function or
tape down the lock-off button.
NOTICE: Do not pull the switch trigger forcibly
without pressing the lock-off button.7KHVZLWFK
may break.
ŹFig.8: 1. Switch trigger 2./RFNRIIEXWWRQ
7RSUHYHQWWKHVZLWFKWULJJHUIURPEHLQJDFFLGHQWDOO\
SXOOHGDORFNRIIEXWWRQLVSURYLGHG
7RVWDUWWKHWRROSUHVVWKHORFNRIIEXWWRQDQGSXOOWKH
VZLWFKWULJJHU5HOHDVHWKHVZLWFKWULJJHUWRVWRS7KHORFN
RIIEXWWRQFDQEHSUHVVHGIURPHLWKHUWKHULJKWRUOHIWVLGH
Indication lamp
Running the tool allows the indication lamp to show the
battery cartridge capacity status.
ŹFig.9: 1. Lamp
When the tool is also overloaded and has stopped
GXULQJRSHUDWLRQWKHODPSOLJKWVXSLQUHG5HIHUWRWKH
IROORZLQJWDEOHIRUWKHVWDWXVDQGDFWLRQWREHWDNHQIRU
the indication lamp.
Indication lamp Status Action to be taken
7KHODPSEOLQNV
in red.
7KLVLQGLFDWHVWKH
appropriate time to
replace the battery
cartridge when
the battery power
becomes low.
Recharge the
battery cartridge.
7KHODPSOLJKWVXS
in red. (Note 1)
7KLVIXQFWLRQZRUNV
when the battery
power is almost
used up. At this
time, tool stops
immediately.
Recharge the
battery cartridge.
7KHODPSOLJKWVXS
in red. (Note 1)
Autostop due to
overload.
7XUQRIIWKHWRRO
1RWH7KHWLPHDWZKLFKWKHLQGLFDWLRQODPSOLJKWVXSYDULHVE\
the temperature around the work area and the battery cartridge
conditions.
Nylon cutting head
NOTICE: Do not bump the tool to the concrete or
asphalt surface. Bumping to this kind of objects
may cause the tool damage.
NOTE:,IWKHQ\ORQFRUGGRHVQRWIHHGRXWZKLOH
bumping the head, rewind or replace the nylon cord
E\IROORZLQJWKHSURFHGXUHVLQWKLVPDQXDO
NOTE:7KHEXPSDQGIHHGPHFKDQLVPZLOOQRWZRUN
SURSHUO\LIWKHQ\ORQFXWWLQJKHDGLVQRWURWDWLQJ
ŹFig.10: 1. Nylon cutting head 2. Cutter
7KHQ\ORQFXWWLQJKHDGKDVDEXPSDQGIHHGPHFKD-
QLVP7RIHHGWKHQ\ORQFRUGEXPSWKHFXWWLQJKHDG
against the ground while the tool is running. As the
Q\ORQFRUGLVIHHGLQJRXWLWZLOODXWRPDWLFDOO\EHFXWWR
the proper length by the cutter.
Plastic blade storage
ŹFig.11: 1. Plastic blade 2. Blade holder
$SODVWLFEODGHIRUUHSODFHPHQWFDQEHVWRUHGLQWKH
EODGHKROGHURIWKHWRRO:KHQVWRULQJRUWDNLQJRXWWKH
blade, remove the battery cartridge.
Adjusting the position of the handle
and front grip
CAUTION: Before adjusting the shaft length,
be sure to switch off the tool and remove the
battery cartridge from the tool. Failure to do so may
FDXVHDSHUVRQDOLQMXU\
$GMXVWWKHOHQJWKRIWKHVKDIWVRWKDW\RXFDQKROGWKH
handle when lowering your right hand.
ŹFig.12: 1. Handle
7RDGMXVWWKHVKDIWOHQJWKRSHQWKHORFNOHYHUWKHQ
DGMXVWWKHOHQJWKRIWKHVKDIWDQGWKHQFORVHWKHORFN
lever.
ŹFig.13: 1. Lock lever
$GMXVWWKHSRVLWLRQRIWKHIURQWJULSVRWKDW\RXFDQKROG
WKHIURQWJULSZKHQORZHULQJ\RXUOHIWKDQG
ŹFig.14: 1. Front grip










