Specifications

Dado cutting guide rule (optional accessory)

Firmly clamp a straight board to the workpiece parallel to the

cutting line and use it as a guide against the dado cutting

guide rule. Adjust the dado cutting guide rule so that the

arrow on the scale plate is aligned with the cutting line. The

best distance between the cutting line and the guide (straight

board) is approximately 150 mm (5-29/32”).

OPERATION

WARNING:

• Be sure to clamp or secure the workpiece before cutting.

It allows both hands to grip both handles. This helps to

maintain secure control of the tool - especially if a

kickback occurs.

• Always be sure that the cutter blade is secured firmly

before cutting.

Hold the tool firmly with both hands. Rest the front end of the

tool base on the workpiece surface and align the arrow on

the scale plate with the cutting line without the cutter blade

making any contact with the workpiece. Switch on and wait

until the cutter blade attains full speed. Then move the tool

gently forward.

Hold the tool base flush with the workpiece at all times. Be

alert and maintain firm control of the tool by holding both

handles securely. Do not cut “one-handed”. When the cut is

complete, do not move the tool away from the workpiece

until the cutter blade has coasted to a complete stop.

NOTE:

• The cutter blade does not contact the workpiece until the

rib on the tool base passes the end of the workpiece.

1. Straight board

2. Dado cutting guide rule

3. Approx. 150 mm (5-29/32”)

4. Cutting line

004834

1. Cutting line

2. Rib

004835