Specifications

5
SPECIFIC SAFETY RULES USB084-1
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to groove cutter safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Inspect for and remove nails or foreign
matter from the workpiece before opera-
tion.
2. Check the cutter blade carefully for cracks
or damage before operation. Replace
cracked or damaged cutter blade immedi-
ately.
3. Secure the workpiece firmly.
4. Do not wear gloves during operation.
5. Hold the tool firmly with both hands.
6. Keep hands away from the underside of
the belt cover and the cutting blade. Also
keep the cord away from them.
7. Never force the tool or cut too fast for
existing conditions.
8. Release the switch immediately if the cut-
ter blade binds or the tool stalls.
9. Never remove the tool from a cut while the
cutter blade is rotating.
10. Never leave the tool running unattended.
11. Never attempt to cut with the tool held
upside down in a vise. This is extremely
dangerous and can lead to serious acci-
dents.
12. Switch off and unplug the tool and wait for
the cutter blade to come to a complete
stop before removing wood chips if wood
chips are jammed in the chip chute.
Always use a wooden stick, etc. to
remove them.
13. Some material contains chemicals which
may be toxic. Take caution to prevent
dust inhalation and skin contact. Follow
material supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.