Owner's Manual

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Adjusting the depth of cut

Loosen the lever on the depth guide and move the base up

or down. At the desired depth of cut, secure the base by

tightening the lever.

CAUTION:

• After adjusting the depth of cut, always tighten the lever

securely.

Sighting

When cutting, align the A position on the front of the base

with your cutting line on the workpiece.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To prevent the switch trigger from being accidentally pulled, a

lock-off button is provided.

To start the tool, push in the lock-off button and pull the

switch trigger. Release the switch trigger to stop.

1. Lever

2. Depth guide

005344

1. Cutting line

005345

1. Switch trigger

2. Lock-off button

005346