Use and Care Manual

Fig. 5 illustrates the RIGHT way to cut off

the end of a board, and Fig. 6 the WRONG

way. If the workpiece is short or small,

clamp it down. DO NOT TRY TO HOLD

SHORT PIECES BY HAND!

14. Never attempt to saw with the tool held

upside down in a vise. This is extremely

dangerous and can lead to serious acci-

dents.

15. WARNING: Blade coasts to stop after

switch is released. Contact with coasting

blade can cause serious injury. Before

setting the tool down after completing a

cut, be sure that the lower (telescoping)

guard has closed and the blade has come

to a complete stop.

16. Wear safety goggles and hearing protec-

tion during operation.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

Fig. 5

Fig. 6

Fig. 7