Instruction manual

0 If you wish to charge two battery cartridges, allow 15 minutes between chargings on the
fast charger.
Installing water
supply
Attach the tank holder on the tank. The
tank holder should be attached around the
portion shown with the dotted line. Tighten
the screw (A)
to the extent that the tank
can
still turn within the tank holder.
Attach the tank holder onto the motor
housing. Tighten the screw
(B) securely.
Connect the cap on the end
of the poly-
vinyl tube to the mouth
of the tank. Turn
the tank clockwise when making the con-
nection. Then tighten the screw (A) secure-
ly to secure the tank.
CAUTION:
If you find the polyvinyl tube is bent like a "V" or has been strained excessively after
installing the water supply, loosen the screw
(B) and adjust the position of the tank to
alleviate the bent, pinched or strained condition.
8