Instruction manual

IMPORTANT SAFETY INSTRUCTIONS
Length of Cord (Feet)
AWG Size of Cord
1.
2.
3.
4.
5.
6.
7.
8.
9.
IO.
11.
12.
25 50
100 150
18
18 18
16
FOR CHARGER &
BATTERY CARTRIDGE
SAVE THESE INSTRUCTIONS - This manual
contains important safety and operating instructions for battery charger.
Before using battery charger, read all instructions and cautionary markings
on
(1) battery charger, (2) battery, and (3) product using battery.
CAUTION
- To reduce risk of injury, charge only MAKITA Battery Cartridge
7000, 7001, 7002, 7033, 7100, 7120, 9000, 9001, 9002, 9033, 9100,
9101,9102,9120,9122,9133,1200. 1201,1202, 1210, 1211,1222, 1233,
I422,1433,9101A, 9102A. 1201A
or 1202A. Other types of batteries may
burst causing personal injury and damage.
Do not expose charger to rain or snow.
Use of an attachment not recommended or sold by the battery charger
manufacturer may result
in a risk of fire, electric shock, or injury to persons.
To reduce risk of damage to electric plug and cord, pull by plug rather than
cord when disconnecting charger.
Make sure cord is located
so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
An extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock.
If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size, and shape
b. That extension cord is properly wired and
in good electrical condition; and
c. That wire size is at least as large as the one specified in the table below.
TABLE
1
RECOMMENDED MINIMUM AWG SIZE FOR
EXTENSION CORDS FOR BATTERY CHARGERS
as those of plug on charger;