User Manual

12
english
MAKITA 447 L
9.2 Guarantee
Our general conditions of busi-
ness are applicable with regard
to the guarantee.
Subject to change as a result of
technical advances.
9.3 Tests and approvals
The vacuum cleaners have
been tested as specified in IEC/
EN 60335-2-69 including ap-
pendix AA. All the requirements
were fulfilled for equipment in
dust class L.
The vacuum cleaners must be
inspected regularly in accor-
dance with national accident
prevention regulations (in Ger-
many as specified in VBG 4 and
DIN VDE 0701 Part 1 and Part
3, at regular intervals and after
repairs or modifications).
A dust test must be performed
at least once every year by
the manufacturer or a trained
person. This test covers, for
example, whether there is da-
mage to the filter, the vacuum
cleaner is sealed to the air
and the control equipment
works properly.
9.4 Technical data
9.5 Accessories
Name Order No.
Disposal bags (pack of 5) W 302 001 311
Filter element W 302 000 751
Foam STOP (6 x 1l) W 8469
Suction hose, antistatic, ø27 mm x 3.5 m W 15325
MAKITA 447 L
EU
AU CH GB 110 V GB 230 V
Voltage Volt 230 240 230 110 230-240
Mains frequency Hz 50/60
Power consumption Watt (HP) 1200 1000
Connected load for appliance
socket
Watt (HP) 2400 1200 1100 1750 2000
Total connected load/fuse Watt (HP)/A 3600/16 2400/10 2300/10 2750/25 3000/13
Volume flow (air) l/min (cfm) 3600 (127) 3100 (109)
Vacuum mbar/kPa (in) 230/23 (93)
Measuring surface sound
pressure level measured at a
distance of 1 m,ISO 3744
dB(A) 60
Operating noise dB(A) 57
Power cord length m 7,5 10
Power cord type H07RN-F 3G1,5 mm²
H07BQ-F
3G1,5 mm²
H07RN-F
3G1,5 mm²
Protection class I
Type of protection (splash
water protected)
IP X4
Radio interference suppression
level
EN 55014-1
Tank volume l (UKgal, USgal) 45 (9.9, 12)
Width mm (in) 476 (19)
Depth mm (in) 506 (20)
Height mm (in) 655 (26)
Weight kg (lb) 16 (35)