User Manual

- 17 -
EN
A - USING THE APPLIANCE
1 ..... RELEASING THE MOTOR UNIT
- Figure “A1” to release the motor unit.
- Figure “A2” to refi t the motor unit.
2 ..... SWITCHING IT ON
For use as a wet or dry vacuum cleaner fi g. “A3”
- Selector switch “A”: in “MANUAL” position ( ).
- Power switches “B”: • Position O = Appliance OFF (red indicator light off)
• Position I = Appliance ON (red indicator light on)
For use with power tool fi g. “A4”
- Selector switch “A”: in “AUTOMATIC” position (
).
- Power switch “B”: Position I = Appliance ON (red indicator light on)
3 ..... CONNECTING A POWER TOOL TO THE VACUUM CLEANER
- Plug the power tool into the socket on the motor unit (D) fi g.”A5”.
- Plug the vacuum cleaner into the power supply fi g. “A6”.
CAUTION: • The plug is designed for power tools with a maximum power rating of
1350 W fi g. “A7”.
• Do not plug in power tools with a higher rating.
• Do not plug more than one power tool into the socket on the motor unit.
TECHNICAL FEATURES
- Mains power supply V~ 230/240
- Frequency Hz 50/60
- IEC power rating W 1000
- MAX power rating W 1100
- Airfl ow m
3
/h approx. 210
- Drum made from
- Capacity of drum ( rated ) 20
- Vacuum rating KPa approx. 21
- Appliance insulation class I
a
- Maximum power supplied to power tool socket W 1350
- Automatic device to prolong suction sec. 8÷10
- Weight Kg approx. 6,5
- Appliance dimensions mm 360x360x500h
- Noise level dB (A) 65