User Manual

- 19 -
EN
A - USING THE APPLIANCE
1 ..... ATTACHING THE CARRY HANDLE
- Attach the carry handle (a1) to the drum (b1) using the screws provided (d1) fig “A1”.
2 ..... POWER CORD STORAGE REEL
- Position the hooks (m) as illustrated in figure “A2”. To wind the power cord, turn the
hooks (m) figure “A2”.
- To unwind the power cord, turn the hooks (m) figure “A3”.
3 ..... RELEASING THE MOTOR UNIT
- Figure “A4” to release the motor unit.
- Figure “A5” to refit the motor unit.
4 ..... SWITCHING ON fig.“A6”
For use as a wet or dry vacuum cleaner
- Selector switch A : in “MANUAL” position ( ).
- Switches B / C : • Position O = Appliance OFF
• Position I = Appliance ON
For use with power tool
- Selector switch A : in “AUTOMATIC” position ( ).
- Switches B / C : in position I = Appliance ON
The appliance runs in synch with the power tool.
02
TECHNICAL FEATURES
- Mains power supply 230/240 V~
- Frequency 50/60 Hz
- IEC power rating (for each motor) 1200 W
- MAX power rating 2400 W
- MAX airflow 195 m
3
/h
- Drum made from
- Motor high efficiency bypass
- Rated capacity of drum 80
- MAX vacuum rating 24 KPa (approx)
- Motor insulation class
- Appliance insulation class I
st
- Maximum power supplied to power tool socket 2000 W
- Automatic device to prolong suction supplied
- Approx. weight 21 kg. (approx)