Drills 13 mm (1/2") 13 mm (1/2") MODEL 6013B MODEL 6013BR - Reversing - INSTRUCTION MANUAL INSULATION SPEC1FlCATlONS Drilling capacities MODEL 6013B 6013ER 1 1 ::/;y 1 Std Wood 36" (1-3/8") I Continuous rating No load I Outout speed 430w 360 550 Rlmin. I 1 4 lnDut 650w 620 * Manufacturer reserves the right t o change specifications of I I Overall length 340" (13-3/8") I I I r:Ep2 Power d:ht 2.8kg (6.2 Ibs) I 2.5m (8.2 f t . ) parts and accessories without notice.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. 2. CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp or wet locations. Keep work area well lit. Don't expose power tools to rain.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONALSTARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in. 16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 17. STAY ALERT. Watch what you are doing, use common sense. Don't operate tool when you are tired. 18.
Drill & Standard Equipment I 0Tool @Chuck @Grip How to use Chuck When installing a drill bit with the chuck key, notice that there are three holes in the chuck where the bit should be tightened, not just one. Tighten evenly a t all three holes in order. (as you would mount a tire).
Drilling in wood In drilling holes in wood using a wood drill with a guide screw, there is no need to bear down on the tool. The guide screw makes it bore naturally by itself. 0 Drilling in metal In general, use a cutting lubricant when drilling metal. (But not with iron or brass). Switch action "Model 60138: To start the tool, simply pull the trigger. Release the trigger to stop.
Optional Accessories CAUTION: The use of any other accessories not specified in this manual might be hazardous. .TYPE 43 Bench Drill Stand Part NO. 1 2 2 1 9 0 - 0 (For Model 60138) ikita ngle Attachment (For h )del 60138) (Ideal for drilling in tight corners or difficult access area). oh Part No. 1 2 2 1 7 7 - 2 Angle 0 Depth Rod Assembly Part NO.
Aug.-20-'84 US 13 m m (1/2") DRILL Model 6013BR Note: The switch and other part configurations may differ from country to country.
Sep.