Specifications

2
SPECIFICATIONS
•Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
•Note: Specifications may differ from country to country.
Symbols
END001-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
..................Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 71 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN60745, EN55014 in accordance
with Council Directives, 89/336/EEC, 98/37/EC.
Ya s u h i k o K a n z a k i CE 2005
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
Model 6216D 6236D 6316D 6336D
Capacities
Steel 10 mm 13 mm
Wood 30 mm 36 mm 30 mm 36 mm
Wood screw 6 mm x 75 mm
Machine screw 6 mm
No load speed (min
-1
)
High 0 - 1,300
Low 0 - 400
Overall length 243 mm 255 mm
Net weight 2.1 kg 2.2 kg 2.2 kg 2.3 kg
Rated voltage D.C. 12 V D.C. 14.4 V D.C. 12 V D.C. 14.4 V